SKF 6000-C3 Bearing — Specifications, Dimensions & Cross-Reference

The SKF 6000-C3 is a deep groove ball bearing with C3 clearance manufactured by SKF. It belongs to the 6000 series and features dimensions of 10 × 26 × 8 mm (bore × OD × width). This bearing has a dynamic load rating of 4,550 N and a static load rating of 1,970 N, making it suitable for light-duty applications.

Technical Specifications

Dimensions
Bore Diameter (d)10 mm
Outside Diameter (D)26 mm
Width (B)8 mm
Weight0.018 kg
Performance
Dynamic Load Rating (Cr)4,550 N
Static Load Rating (C₀r)1,970 N
Limiting Speed (Grease)29,000 rpm
Limiting Speed (Oil)34,000 rpm
💡 Application Note: The 6000 series bearings are commonly used in electric motors, power tools, small pumps, and household appliances. The -C3 suffix indicates greater-than-normal radial internal clearance, recommended for applications with temperature differentials or tight shaft/housing fits.

Brand Cross-Reference — 6000-C3 Equivalents

The following bearings from other manufacturers are interchangeable with the SKF 6000-C3. All share identical dimensions (10×26×8mm) and comparable load ratings:

BrandPart NumberDynamic Load (N)Static Load (N)
SKFSKF 6000-C3 ✦4,5501,970
NACHI NACHI 6000-C3 4,550 1,970
KOYO KOYO 6000-C3 4,550 1,970
Timken Timken 6000-C3 4,550 1,970
FAG FAG 6000-C3 4,550 1,970
NSK NSK 6000-C3 4,550 1,970
NTN NTN 6000-C3 4,550 1,970

Available Variants

The SKF 6000 base bearing is available in these configurations:

SKF 6000-NR
Open with snap ring
SKF 6000-ZZ-C3
Double shielded, C3 clearance
SKF 6000-2RS-C3
Double sealed, C3 clearance
SKF 6000-2Z
Double metal shielded (ISO)
SKF 6000-ZZ
Double metal shielded
SKF 6000-2RS
Double rubber sealed
SKF 6000
Open (no seal/shield)

Frequently Asked Questions

What are the dimensions of the SKF 6000-C3?

The SKF 6000-C3 has a bore diameter of 10mm, outside diameter of 26mm, and width of 8mm. It weighs 0.018kg.

What is the load capacity of the SKF 6000-C3?

The dynamic load rating (Cr) is 4,550 N and the static load rating (C₀r) is 1,970 N. The maximum recommended speed is 29,000 rpm with grease lubrication or 34,000 rpm with oil lubrication.

What bearings are equivalent to SKF 6000-C3?

The 6000-C3 is manufactured by multiple brands including SKF, NTN, NSK, FAG, Timken, KOYO, and NACHI. All versions share the same 10×26×8mm dimensions and are interchangeable in most applications. See the cross-reference table above for detailed comparisons.