FAG 6197-2Z Bearing — Specifications, Dimensions & Cross-Reference

The FAG 6197-2Z is a deep groove ball bearing double metal shielded manufactured by FAG. It belongs to the 619 series and features dimensions of 35 × 62 × 14 mm (bore × OD × width). This bearing has a dynamic load rating of 16,000 N and a static load rating of 10,300 N, making it suitable for medium-duty applications.

Technical Specifications

Dimensions
Bore Diameter (d)	35 mm
Outside Diameter (D)	62 mm
Width (B)	14 mm
Weight	0.147 kg

Performance
Dynamic Load Rating (Cr)	16,000 N
Static Load Rating (C₀r)	10,300 N
Limiting Speed (Grease)	11,000 rpm
Limiting Speed (Oil)	13,000 rpm

💡 Application Note: The 619 series bearings are commonly used in thin-section applications, robotics, aerospace mechanisms, and space-constrained designs. The -2Z suffix indicates double metal shields, offering good protection while maintaining lower friction than rubber seals — suitable for higher speed applications.

Brand Cross-Reference — 6197-2Z Equivalents

The following bearings from other manufacturers are interchangeable with the FAG 6197-2Z. All share identical dimensions (35×62×14mm) and comparable load ratings:

Brand	Part Number	Dynamic Load (N)	Static Load (N)
FAG	FAG 6197-2Z ✦	16,000	10,300
SKF	SKF 6197-2Z	16,000	10,300
NTN	NTN 6197-2Z	16,000	10,300
NACHI	NACHI 6197-2Z	16,000	10,300
KOYO	KOYO 6197-2Z	16,000	10,300
Timken	Timken 6197-2Z	16,000	10,300
NSK	NSK 6197-2Z	16,000	10,300
NTN	NTN 6197-2Z	16,000	10,300
SKF	SKF 6197-2Z	16,000	10,300

Available Variants

The FAG 6197 base bearing is available in these configurations:

FAG 6197-NR

Open with snap ring

FAG 6197-ZZ-C3

Double shielded, C3 clearance

FAG 6197-2RS-C3

Double sealed, C3 clearance

FAG 6197-C3

Open, C3 clearance

FAG 6197-ZZ

Double metal shielded

FAG 6197-2RS

Double rubber sealed

FAG 6197

Open (no seal/shield)

Frequently Asked Questions

What are the dimensions of the FAG 6197-2Z?

The FAG 6197-2Z has a bore diameter of 35mm, outside diameter of 62mm, and width of 14mm. It weighs 0.147kg.

What is the load capacity of the FAG 6197-2Z?

The dynamic load rating (Cr) is 16,000 N and the static load rating (C₀r) is 10,300 N. The maximum recommended speed is 11,000 rpm with grease lubrication or 13,000 rpm with oil lubrication.

What bearings are equivalent to FAG 6197-2Z?

The 6197-2Z is manufactured by multiple brands including SKF, NTN, NSK, FAG, Timken, KOYO, and NACHI. All versions share the same 35×62×14mm dimensions and are interchangeable in most applications. See the cross-reference table above for detailed comparisons.