FAG 2200-C3 Bearing — Specifications, Dimensions & Cross-Reference

The FAG 2200-C3 is a self-aligning ball bearing with C3 clearance manufactured by FAG. It belongs to the 2200 series and features dimensions of 10 × 30 × 14 mm (bore × OD × width). This bearing has a dynamic load rating of 6,240 N and a static load rating of 1,760 N, making it suitable for light-duty applications.

Technical Specifications

Dimensions
Bore Diameter (d)	10 mm
Outside Diameter (D)	30 mm
Width (B)	14 mm
Weight	0.040 kg

Performance
Dynamic Load Rating (Cr)	6,240 N
Static Load Rating (C₀r)	1,760 N
Limiting Speed (Grease)	18,000 rpm
Limiting Speed (Oil)	24,000 rpm

💡 Application Note: The 2200 series bearings are commonly used in agricultural equipment, conveyor systems, and applications with moderate misalignment. The -C3 suffix indicates greater-than-normal radial internal clearance, recommended for applications with temperature differentials or tight shaft/housing fits.

Brand Cross-Reference — 2200-C3 Equivalents

The following bearings from other manufacturers are interchangeable with the FAG 2200-C3. All share identical dimensions (10×30×14mm) and comparable load ratings:

Brand	Part Number	Dynamic Load (N)	Static Load (N)
FAG	FAG 2200-C3 ✦	6,240	1,760
Timken	Timken 2200-C3	6,240	1,760
SKF	SKF 2200-C3	6,240	1,760
NACHI	NACHI 2200-C3	6,240	1,760
KOYO	KOYO 2200-C3	6,240	1,760
Timken	Timken 2200-C3	6,240	1,760
NSK	NSK 2200-C3	6,240	1,760
NTN	NTN 2200-C3	6,240	1,760
SKF	SKF 2200-C3	6,240	1,760

Available Variants

The FAG 2200 base bearing is available in these configurations:

FAG 2200-NR

Open with snap ring

FAG 2200-ZZ-C3

Double shielded, C3 clearance

FAG 2200-2RS-C3

Double sealed, C3 clearance

FAG 2200-2Z

Double metal shielded (ISO)

FAG 2200-ZZ

Double metal shielded

FAG 2200-2RS

Double rubber sealed

FAG 2200

Open (no seal/shield)

Frequently Asked Questions

What are the dimensions of the FAG 2200-C3?

The FAG 2200-C3 has a bore diameter of 10mm, outside diameter of 30mm, and width of 14mm. It weighs 0.040kg.

What is the load capacity of the FAG 2200-C3?

The dynamic load rating (Cr) is 6,240 N and the static load rating (C₀r) is 1,760 N. The maximum recommended speed is 18,000 rpm with grease lubrication or 24,000 rpm with oil lubrication.

What bearings are equivalent to FAG 2200-C3?

The 2200-C3 is manufactured by multiple brands including SKF, NTN, NSK, FAG, Timken, KOYO, and NACHI. All versions share the same 10×30×14mm dimensions and are interchangeable in most applications. See the cross-reference table above for detailed comparisons.