FAG 2201-ZZ-C3 Bearing — Specifications, Dimensions & Cross-Reference

The FAG 2201-ZZ-C3 is a self-aligning ball bearing double metal shielded manufactured by FAG. It belongs to the 2200 series and features dimensions of 12 × 32 × 14 mm (bore × OD × width). This bearing has a dynamic load rating of 6,500 N and a static load rating of 1,900 N, making it suitable for light-duty applications.

Technical Specifications

Dimensions
Bore Diameter (d)	12 mm
Outside Diameter (D)	32 mm
Width (B)	14 mm
Weight	0.044 kg

Performance
Dynamic Load Rating (Cr)	6,500 N
Static Load Rating (C₀r)	1,900 N
Limiting Speed (Grease)	17,000 rpm
Limiting Speed (Oil)	22,000 rpm

💡 Application Note: The 2200 series bearings are commonly used in agricultural equipment, conveyor systems, and applications with moderate misalignment. The -ZZ suffix indicates double metal shields, offering good protection while maintaining lower friction than rubber seals — suitable for higher speed applications.

Brand Cross-Reference — 2201-ZZ-C3 Equivalents

The following bearings from other manufacturers are interchangeable with the FAG 2201-ZZ-C3. All share identical dimensions (12×32×14mm) and comparable load ratings:

Brand	Part Number	Dynamic Load (N)	Static Load (N)
FAG	FAG 2201-ZZ-C3 ✦	6,500	1,900
Timken	Timken 2201-ZZ-C3	6,500	1,900
SKF	SKF 2201-ZZ-C3	6,500	1,900
NACHI	NACHI 2201-ZZ-C3	6,500	1,900
KOYO	KOYO 2201-ZZ-C3	6,500	1,900
Timken	Timken 2201-ZZ-C3	6,500	1,900
NSK	NSK 2201-ZZ-C3	6,500	1,900
NTN	NTN 2201-ZZ-C3	6,500	1,900
SKF	SKF 2201-ZZ-C3	6,500	1,900

Available Variants

The FAG 2201 base bearing is available in these configurations:

FAG 2201-NR

Open with snap ring

FAG 2201-2RS-C3

Double sealed, C3 clearance

FAG 2201-C3

Open, C3 clearance

FAG 2201-2Z

Double metal shielded (ISO)

FAG 2201-ZZ

Double metal shielded

FAG 2201-2RS

Double rubber sealed

FAG 2201

Open (no seal/shield)

Frequently Asked Questions

What are the dimensions of the FAG 2201-ZZ-C3?

The FAG 2201-ZZ-C3 has a bore diameter of 12mm, outside diameter of 32mm, and width of 14mm. It weighs 0.044kg.

What is the load capacity of the FAG 2201-ZZ-C3?

The dynamic load rating (Cr) is 6,500 N and the static load rating (C₀r) is 1,900 N. The maximum recommended speed is 17,000 rpm with grease lubrication or 22,000 rpm with oil lubrication.

What bearings are equivalent to FAG 2201-ZZ-C3?

The 2201-ZZ-C3 is manufactured by multiple brands including SKF, NTN, NSK, FAG, Timken, KOYO, and NACHI. All versions share the same 12×32×14mm dimensions and are interchangeable in most applications. See the cross-reference table above for detailed comparisons.