FAG 6010-C3 Bearing — Specifications, Dimensions & Cross-Reference

The FAG 6010-C3 is a deep groove ball bearing with C3 clearance manufactured by FAG. It belongs to the 6000 series and features dimensions of 50 × 80 × 16 mm (bore × OD × width). This bearing has a dynamic load rating of 16,940 N and a static load rating of 12,950 N, making it suitable for medium-duty applications.

Technical Specifications

Dimensions
Bore Diameter (d)	50 mm
Outside Diameter (D)	80 mm
Width (B)	16 mm
Weight	0.247 kg

Performance
Dynamic Load Rating (Cr)	16,940 N
Static Load Rating (C₀r)	12,950 N
Limiting Speed (Grease)	8,400 rpm
Limiting Speed (Oil)	9,900 rpm

💡 Application Note: The 6000 series bearings are commonly used in electric motors, power tools, small pumps, and household appliances. The -C3 suffix indicates greater-than-normal radial internal clearance, recommended for applications with temperature differentials or tight shaft/housing fits.

Brand Cross-Reference — 6010-C3 Equivalents

The following bearings from other manufacturers are interchangeable with the FAG 6010-C3. All share identical dimensions (50×80×16mm) and comparable load ratings:

Brand	Part Number	Dynamic Load (N)	Static Load (N)
FAG	FAG 6010-C3 ✦	16,940	12,950
NACHI	NACHI 6010-C3	16,940	12,950
KOYO	KOYO 6010-C3	16,940	12,950
Timken	Timken 6010-C3	16,940	12,950
NSK	NSK 6010-C3	16,940	12,950
NTN	NTN 6010-C3	16,940	12,950
SKF	SKF 6010-C3	16,940	12,950

Available Variants

The FAG 6010 base bearing is available in these configurations:

FAG 6010-NR

Open with snap ring

FAG 6010-ZZ-C3

Double shielded, C3 clearance

FAG 6010-2RS-C3

Double sealed, C3 clearance

FAG 6010-2Z

Double metal shielded (ISO)

FAG 6010-ZZ

Double metal shielded

FAG 6010-2RS

Double rubber sealed

FAG 6010

Open (no seal/shield)

Frequently Asked Questions

What are the dimensions of the FAG 6010-C3?

The FAG 6010-C3 has a bore diameter of 50mm, outside diameter of 80mm, and width of 16mm. It weighs 0.247kg.

What is the load capacity of the FAG 6010-C3?

The dynamic load rating (Cr) is 16,940 N and the static load rating (C₀r) is 12,950 N. The maximum recommended speed is 8,400 rpm with grease lubrication or 9,900 rpm with oil lubrication.

What bearings are equivalent to FAG 6010-C3?

The 6010-C3 is manufactured by multiple brands including SKF, NTN, NSK, FAG, Timken, KOYO, and NACHI. All versions share the same 50×80×16mm dimensions and are interchangeable in most applications. See the cross-reference table above for detailed comparisons.