FAG 6012-2Z Bearing — Specifications, Dimensions & Cross-Reference

The FAG 6012-2Z is a deep groove ball bearing double metal shielded manufactured by FAG. It belongs to the 6000 series and features dimensions of 60 × 95 × 18 mm (bore × OD × width). This bearing has a dynamic load rating of 24,000 N and a static load rating of 18,300 N, making it suitable for heavy-duty applications.

Technical Specifications

Dimensions
Bore Diameter (d)	60 mm
Outside Diameter (D)	95 mm
Width (B)	18 mm
Weight	0.362 kg

Performance
Dynamic Load Rating (Cr)	24,000 N
Static Load Rating (C₀r)	18,300 N
Limiting Speed (Grease)	7,000 rpm
Limiting Speed (Oil)	8,500 rpm

💡 Application Note: The 6000 series bearings are commonly used in electric motors, power tools, small pumps, and household appliances. The -2Z suffix indicates double metal shields, offering good protection while maintaining lower friction than rubber seals — suitable for higher speed applications.

Brand Cross-Reference — 6012-2Z Equivalents

The following bearings from other manufacturers are interchangeable with the FAG 6012-2Z. All share identical dimensions (60×95×18mm) and comparable load ratings:

Brand	Part Number	Dynamic Load (N)	Static Load (N)
FAG	FAG 6012-2Z ✦	24,000	18,300
Timken	Timken 6012-2Z	24,000	18,300
SKF	SKF 6012-2Z	24,000	18,300
NACHI	NACHI 6012-2Z	24,000	18,300
KOYO	KOYO 6012-2Z	24,000	18,300
Timken	Timken 6012-2Z	24,000	18,300
NTN	NTN 6012-2Z	24,000	18,300
NSK	NSK 6012-2Z	24,000	18,300
SKF	SKF 6012-2Z	24,000	18,300

Available Variants

The FAG 6012 base bearing is available in these configurations:

FAG 6012-NR

Open with snap ring

FAG 6012-ZZ-C3

Double shielded, C3 clearance

FAG 6012-2RS-C3

Double sealed, C3 clearance

FAG 6012-C3

Open, C3 clearance

FAG 6012-ZZ

Double metal shielded

FAG 6012-2RS

Double rubber sealed

FAG 6012

Open (no seal/shield)

Frequently Asked Questions

What are the dimensions of the FAG 6012-2Z?

The FAG 6012-2Z has a bore diameter of 60mm, outside diameter of 95mm, and width of 18mm. It weighs 0.362kg.

What is the load capacity of the FAG 6012-2Z?

The dynamic load rating (Cr) is 24,000 N and the static load rating (C₀r) is 18,300 N. The maximum recommended speed is 7,000 rpm with grease lubrication or 8,500 rpm with oil lubrication.

What bearings are equivalent to FAG 6012-2Z?

The 6012-2Z is manufactured by multiple brands including SKF, NTN, NSK, FAG, Timken, KOYO, and NACHI. All versions share the same 60×95×18mm dimensions and are interchangeable in most applications. See the cross-reference table above for detailed comparisons.