FAG 6002-NR Bearing — Specifications, Dimensions & Cross-Reference

The FAG 6002-NR is a deep groove ball bearing with snap ring groove manufactured by FAG. It belongs to the 6000 series and features dimensions of 15 × 32 × 9 mm (bore × OD × width). This bearing has a dynamic load rating of 5,600 N and a static load rating of 2,840 N, making it suitable for light-duty applications.

Technical Specifications

Dimensions
Bore Diameter (d)	15 mm
Outside Diameter (D)	32 mm
Width (B)	9 mm
Weight	0.029 kg

Performance
Dynamic Load Rating (Cr)	5,600 N
Static Load Rating (C₀r)	2,840 N
Limiting Speed (Grease)	22,000 rpm
Limiting Speed (Oil)	26,000 rpm

💡 Application Note: The 6000 series bearings are commonly used in electric motors, power tools, small pumps, and household appliances. The -NR suffix indicates an external snap ring groove on the outer ring, allowing easy axial location in housing bores.

Brand Cross-Reference — 6002-NR Equivalents

The following bearings from other manufacturers are interchangeable with the FAG 6002-NR. All share identical dimensions (15×32×9mm) and comparable load ratings:

Brand	Part Number	Dynamic Load (N)	Static Load (N)
FAG	FAG 6002-NR ✦	5,600	2,840
NACHI	NACHI 6002-NR	5,600	2,840
KOYO	KOYO 6002-NR	5,600	2,840
Timken	Timken 6002-NR	5,600	2,840
NSK	NSK 6002-NR	5,600	2,840
NTN	NTN 6002-NR	5,600	2,840
SKF	SKF 6002-NR	5,600	2,840

Available Variants

The FAG 6002 base bearing is available in these configurations:

FAG 6002-ZZ-C3

Double shielded, C3 clearance

FAG 6002-2RS-C3

Double sealed, C3 clearance

FAG 6002-C3

Open, C3 clearance

FAG 6002-2Z

Double metal shielded (ISO)

FAG 6002-ZZ

Double metal shielded

FAG 6002-2RS

Double rubber sealed

FAG 6002

Open (no seal/shield)

Frequently Asked Questions

What are the dimensions of the FAG 6002-NR?

The FAG 6002-NR has a bore diameter of 15mm, outside diameter of 32mm, and width of 9mm. It weighs 0.029kg.

What is the load capacity of the FAG 6002-NR?

The dynamic load rating (Cr) is 5,600 N and the static load rating (C₀r) is 2,840 N. The maximum recommended speed is 22,000 rpm with grease lubrication or 26,000 rpm with oil lubrication.

What bearings are equivalent to FAG 6002-NR?

The 6002-NR is manufactured by multiple brands including SKF, NTN, NSK, FAG, Timken, KOYO, and NACHI. All versions share the same 15×32×9mm dimensions and are interchangeable in most applications. See the cross-reference table above for detailed comparisons.