FAG 7207-C3 Bearing — Specifications, Dimensions & Cross-Reference

The FAG 7207-C3 is a angular contact ball bearing with C3 clearance manufactured by FAG. It belongs to the 7200 series and features dimensions of 35 × 72 × 17 mm (bore × OD × width). This bearing has a dynamic load rating of 26,000 N and a static load rating of 15,300 N, making it suitable for heavy-duty applications.

Technical Specifications

Dimensions
Bore Diameter (d)	35 mm
Outside Diameter (D)	72 mm
Width (B)	17 mm
Weight	0.288 kg

Performance
Dynamic Load Rating (Cr)	26,000 N
Static Load Rating (C₀r)	15,300 N
Limiting Speed (Grease)	9,500 rpm
Limiting Speed (Oil)	12,000 rpm

💡 Application Note: The 7200 series bearings are commonly used in machine tool spindles, pumps, compressors, and applications requiring combined radial and axial loads. The -C3 suffix indicates greater-than-normal radial internal clearance, recommended for applications with temperature differentials or tight shaft/housing fits.

Brand Cross-Reference — 7207-C3 Equivalents

The following bearings from other manufacturers are interchangeable with the FAG 7207-C3. All share identical dimensions (35×72×17mm) and comparable load ratings:

Brand	Part Number	Dynamic Load (N)	Static Load (N)
FAG	FAG 7207-C3 ✦	26,000	15,300
SKF	SKF 7207-C3	26,000	15,300
NTN	NTN 7207-C3	26,000	15,300
KOYO	KOYO 7207-C3	26,000	15,300
NACHI	NACHI 7207-C3	26,000	15,300
Timken	Timken 7207-C3	26,000	15,300
NSK	NSK 7207-C3	26,000	15,300
NTN	NTN 7207-C3	26,000	15,300
SKF	SKF 7207-C3	26,000	15,300

Available Variants

The FAG 7207 base bearing is available in these configurations:

FAG 7207-ZZ-C3

"Double shielded

FAG 7207-ZZ

Double metal shielded

FAG 7207-NR

Open with snap ring

FAG 7207-2Z

Double metal shielded (ISO)

FAG 7207-2RS-C3

"Double sealed

FAG 7207-2RS

Double rubber sealed

FAG 7207

Open (no seal/shield)

Frequently Asked Questions

What are the dimensions of the FAG 7207-C3?

The FAG 7207-C3 has a bore diameter of 35mm, outside diameter of 72mm, and width of 17mm. It weighs 0.288kg.

What is the load capacity of the FAG 7207-C3?

The dynamic load rating (Cr) is 26,000 N and the static load rating (C₀r) is 15,300 N. The maximum recommended speed is 9,500 rpm with grease lubrication or 12,000 rpm with oil lubrication.

What bearings are equivalent to FAG 7207-C3?

The 7207-C3 is manufactured by multiple brands including SKF, NTN, NSK, FAG, Timken, KOYO, and NACHI. All versions share the same 35×72×17mm dimensions and are interchangeable in most applications. See the cross-reference table above for detailed comparisons.